Vetus Water Systems

Fresh water on board is the most important supply for a long passage and Vetus water tanks are made of a taste-free material to ensure purity.

There is no possibility of rust build up and the tank can be inspected through the inspection lid. The liquid can be seen from the outside - the most accurate check there can be. For extra water capacity, use a flexible water tank and these can be joined to the main supply tank. To ensure you take the comforts of home with you onto the high seas, pressurised water systems ensure a constant and even flow "on demand".

Rigid Water Tanks

These tanks are supplied with an inspection lid, angled connection for filling hose (35mm), angled connection for water pump (16mm), angled connection for ventilation (16mm), two mounting straps and 16mm T-joint for interconnection. Extra inspection lid kits may also be supplied.

Capacity (Litres)	Capacity (Gallons)	Size l x w x h	Notes
40	8.9	472 x 362 x 370 mm	Includes moulded inlet (38mm), breather (16mm) & pick-up (12mm) connectors plus inspection lid.
42	9.3	460 x 350 x 290 mm	-
60	13.3	690 x 362 x 370 mm	Includes moulded inlet (38mm), breather (16mm) & pick-up (12mm) connectors plus inspection lid.
61	13.6	660 x 350 x 290 mm	-
88	19.6	800 x 400 x 330 mm	One internal baffle
88	19.6	900 x 362 x 370 mm	Includes moulded inlet (38mm), breather (16mm) & pick-up (12mm) connectors plus inspection lid.
110	24.4	1200 x 350 x 290 mm	-
137	30.4	1200 x 400 x 330 mm	One internal baffle
170	37.8	1100 x 440 x 400 mm	One internal baffle
215	47.8	1000 x 600 x 400 mm	One internal baffle
335	74.4	1700 x 700 x 350 mm	One internal baffle
390	1400	1700 x 800 x 400 mm	One internal baffle

Fresh Water Pumps

Comparable with the piped water system at home, the Vetus pressurised water system provides constant water flow in the vessel's fresh water circuit. The pressurised tank with a rubber diaphragm inside prevents the pump motor from being started each time a supply of water is required. This arrangement ensures a minimum of noise, a constant water flow and a saving of energy.

Model	Capacity (Litres / Min)	Amps	Pressure Bar / PSI	Notes
HF1208	12.5	4	2.5 / 35	12v with 8l pressurised tank
HF2408	12.5	1.8	2.5 / 35	24v with 8l pressurised tank
HF1220	17	6	3.2 / 45	12v with 19l pressurised tank
HF2420	17	2.5	3.2 / 45	24v with 19l pressurised tank

Sea Water Strainers

All Vetus cooling water strainers are provided witha transparent cover, allowing easy inspection of the filter without dismantling. The cleaning of the filter will take only 30 seconds; due to the large active surface. However, the filter seldom needs to be cleaned. Waterstrainers 150 and 330 can be supplied with complete connection kits including waterscoop, ball valve and hose etc., and the same components are available for all other units.

Model	Inlet / Outlet	Maximum Capacity / Min (Litres / Gall)	Recommended Capacity / Min (Litres / Gall)	Notes
FILTER150	28.5mm	262 / -	114 / -	Plastic housing with transparent inspection lid secured by central wingnut.
FILTER140	13mm	50 / -	23 / -	Plastic housing with screw-on transparent inspection lid.
FILTER140	16mm	80 / -	35 / -	Plastic housing with screw-on transparent inspection lid.
FILTER140	19mm	120 / -	51 / -	Plastic housing with screw-on transparent inspection lid.
FTR33013	12.7mm	50 / 11	23 / 5	Plastic housing with screw-on transparent inspection lid.
FTR33016	15.9mm	80 / 18	35 / 8	Plastic housing with screw-on transparent inspection lid.
FTR33019	19.1mm	120 / 26	51 / 11	Plastic housing with screw-on transparent inspection lid.
FTR33025	25.4mm	210 / 46	91 / 20	Plastic housing with screw-on transparent inspection lid.
FTR33032	31.8mm	330 / 72	143 / 31	Plastic housing with screw-on transparent inspection lid.
FTR33038	38.1mm	470 / 102	200 / 43	Plastic housing with screw-on transparent inspection lid.
FILTER525	38mm	525 / 115	205 / 45	Stainless steel housing with transparent inspection lid secured by 8 nuts. Requires hose connectors.
FTR132038	38mm	520 / 114	205 / 45	Plastic housing with screw-on transparent inspection lid. Requires brass hose connectors.
FTR132050	50mm	850 / 187	365 / 80	Plastic housing with screw-on transparent inspection lid. Requires brass hose connectors.
FTR132063	63mm	1320 / 290	570 / 125	Plastic housing with screw-on transparent inspection lid. Requires brass hose connectors.
FTR190063	63mm	1320 / 290	570 / 125	Plastic housing with screw-on transparent inspection lid. Requires brass hose connectors.
FTR190076	63mm	1900 / 418	820 / 180	Plastic housing with transparent inspection lid secured with 6 nuts. Requires brass hose connectors.

Bilge Pumps

All these Vetus electric bilge pumps are made in conformity with the specification requirements of ABYC H-22 of ISO-8849 Marine and of the US Coast Guard Safety Standards 33 CFR, part 183. An automatic float switch is also available.

Model	Pump type	Capacity (Litres / Min @ 0m)	Capacity (Litres / Min @ 1m)	Connections	Pump housing diameter
EBP30	12v electric	32	22	19mm	74mm
EBP40	12v electric	41	27	19mm	99mm
EBP60	12v electric	57	44	28mm	99mm
EBP80	12v electric	79	60	28mm	125mm

Note: all specifications are subject to change without notice. Please contact us for details of prices and any further information, full details are available in the current Vetus catalogue which you can request online.